Lexan Housing with Weatherproof Sealant Photocontrol, 1800VA Ballast, SPST Switch, 2000W Power, 120/277VAC Voltage
Lexan Housing with Weatherproof Sealant Photocontrol, 1800VA Ballast, SPST Switch, 2000W Power, 120/277VAC Voltage by NSI at Buditech. MPN: 2000-7. Hurry! Limited time offer. Offer valid only while supplies last. This NSi Industries 2000-7 switch and photocontrol accepts 120/277 VAC input and each of its three circuits can activate a 1,800 ballast for lighting
This NSi Industries 2000-7 switch and photocontrol accepts 120/277 VAC input and each of its three circuits can activate a 1,800 ballast for lighting control. The integral photocell turns on lighting when the ambient light level drops below a user-selectable light level of 1 to 5 foot candles (fc) and turns the lighting off when the level is at approximately three times that setting. The single-pole single-throw (SPST) contacts are housed within an impact-resistant dome. The base is ultrasonically welded for maximum strength, and the sensor accepts 1/2" conduit and has 180-degree swivel capacity. This switch and photo sensor unit is Underwriter Laboratories (UL) Listed and Canadian Standards Association (CSA) certified for quality assurance and is suitable for controlling lighting.
|Switch type||Photo sensor and switch, weatherproof|
|Input power supply||120/277 VAC, 50/60 Hz, 1 watt power consumption|
|Output contacts||SPST contacts, 1,800 watt ballast capable, 2,000 watt load|
|On/off control||On at user-selectable 1 to 5 fc, Off at 3 to 15 fc|
|Enclosure||1/2" conduit mount, indoor/outdoor use|
|Terminal wire size range||#16 AWG (American wire gauge)|
|Operating temperature range||-40 to +140 degrees F (-40 to +60 degrees C)|
|Standards met||UL Listed, CSA certified|
Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.
NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.
Features & Highlights
- Photocontrol for switching lights on/off based on ambient light
- One to 15 foot candle light level sensitivity for varying light levels
- 120/277 VAC input voltage for multiple uses
- Dome and base ultrasonically welded for maximum strength
- Mounting for 1/2" conduit with 180-degree swivel
|Package Weight:||0.2 pounds|
|Package Size:||2.3 x 1.8 x 1.8 inches|