JANSANE PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack
Super Savings Item! Save 32% on the JANSANE PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack by JANSANE at Buditech. Hurry! Limited time offer. Offer valid only while supplies last. This usb to ttl serial cable provide a good connectivity to your micro controller, Raspberry Pi, WiFi router. Because of the separated pin plugs,
Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black.
It can be perfectly compatible with most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux.
Note: this cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc.
Upgrading single chip resoltion to traditional RS232 equipment to USB port
USB to RS232 converter/cable/encrypted dog
USB port data transmission cable on Health/medical care
docking USB interface to media players
USB interface data transmission cable for mobile phone/PDA
Serial-over-IP wireless solutions
USB barcode/smart card reader
USB interface to GPS navigation
Computer extension dock/port replicator
USB interface to industrial instruments/automation control
USB interface to modem
USB interface to home gateway/STB
USB interface to to MCU equipments
Battery charger application
Four Wire Designation:
Red - 5v
Black - Ground
Green - Tx
White - Rx
100% Satisfaction Guarantee: 12-Month Warranty; No satisfied ,Free reason for return; Quality problem, please contact us, we will resend you a new one.
Package: 3 Pack usb to ttl serial cable
Features & Highlights
- 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port.
- 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything.
- 【Four Wire】- Red - 5v; Black - Ground; Green -Tx; White - Rx
- 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter.
- 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc.
|Package Weight:||0.2 pounds|
|Package Size:||5 x 0.7 x 0.7 inches|